0 393564
Photo gallery: What is St. George Ribbon? How to draw it and tie a bow beautifully
George Ribbon png
Everyone is familiar with the St. George ribbon - a symbol great victory. However, for most people, knowledge about this symbol of May 9 is very limited. The semantic load, the history of creation, all this remains a mystery for some. So what is this symbol, what do the colors of the St. George ribbon mean and how did it appear? All this will be discussed in our article. We will also hold small workshops for schoolchildren: how to draw a victory accessory and how to tie it beautifully in the form of a bow.
The history of the emergence of the St. George's ribbon
The history of creation and what the St. George ribbon symbolizes
This symbol of victory originates from the distant times of the reign of Catherine II. It was the Empress who laid the foundation for the existence of the Order of St. George the Victorious. This order in its composition had a two-color ribbon very similar to the current one, which was called St. George's. In those days, she had 3 black stripes and two yellow ones.
However, in Soviet times this award was abolished, and the "Guards Ribbon" came to replace the St. George's Ribbon with some additions. With its help, the Order of Glory and the medal "For the Victory over Germany" were issued.
What do the colors mean
This ribbon, like the modern one, has two colors - black and orange. Such a color scheme carries a certain semantic load. There are still disputes in society about the designation of the colors used in the ribbon, the explanation for the chosen colors is sometimes found in the depths of history. Russian state. Officially it is believed that black symbolizes smoke, and orange - fire. All together they personify the valor and glory of the military. After the end of World War II, many other meritorious service awards were adorned with ribbon.
Why is the tape "St. George" and not "Guards"
Due to the fact that the modern symbol is more like a guards ribbon, it would be more correct to call it the guards. However, after the launch of the St. George Ribbon campaign in 2005 on the 60th anniversary of the Victory, the military accessory was named the campaign. Its goal was to create and maintain a festive atmosphere, develop a sense of pride and awareness of the importance of the feat of Soviet soldiers. The symbols distributed free of charge in honor of the Victory Day on May 9 have become a symbol of memory and pride. But not everyone is positive about such an action. Some remedies mass media and organizations believe that attaching a ribbon to clothes, and even more so to cars, is a manifestation of disrespect for the merits of fathers and grandfathers.
How to draw a St. George ribbon: a master class with step by step photos
On Victory Day, the symbol can be found not only as a strip of fabric on clothes, but also in the form of a drawing. This symbolism very easy to draw, it consists of only two colors. Below is step by step master class according to the drawing of the St. George ribbon.
Step by step drawing instructions
How to tie a bow from St. George's ribbon, master classes with photos and videos
The handed out military accessory is often tied to handbags, car radio antennas, or hand-tied. However, the most correct thing is to simply attach this symbolism of the Victory on May 9 to the chest on the left side. Such a method will not desecrate the memory of the fallen.
The simplest method of tying a bow from a St. George's ribbon is to simply fold it in a loop. In the case of a short cut, zigzag folding is most suitable. The resulting bow can only be pinned to the clothes, for example, on the lapel with a pin or needle at the intersection point.
For the basis next way tying, you can take the previous method: fold the tape as in easy way, then slide one end to the intersection, while obtaining two symmetrical loops. The central part should be fixed with a pin or needle. St. George's ribbon in the shape of a bow for beauty is tied at the intersection point with threads of a suitable color.
Good morning, today let's draw a ribbon in Photoshop, like this:
The task itself is not very difficult and you can quickly draw exactly the same ribbon.
First, I will draw a hat, and I need ribbons behind the coat of arms, which I will steal from the Russian Federation through Yandex, because Google did not give out normal coats of arms:
This is a cool coat of arms, but the red backing still annoyed me a little, and on a white background without a backing, the eagle will be cooler. For a long time I cut it out:
Then I slightly processed the perfectum and scribbled, plus I entered a little into White background. Led away a little yellow into blue. Perhaps this is my paranoia already - but I like it better this way. 🙂
That's what I did:
Now, here's why I'm writing this post. We will draw ribbons that will climb out from behind the coat of arms. You can do them through burn and dodge, or through gradients. I have a tablet - so I almost always do it through burn and dodge, but it's quite convenient to do it with a mouse.
In general, first draw the base of the ribbon. Earlier, once upon a time, I tried to draw a ribbon completely with a pentula, but this is a complete hopelessness. Everything turned out crooked and askew, that's how No need do:
After all, even if you do not look closely, you can immediately see that the oblique tape turned out. Maybe if you are super accurate, then try it, it will suddenly work out. 🙂
I make it easier. I draw a line, how the tape should wriggle:
After choosing a brush, take the pentula again, click on our outline right click mouse, select Stroke Path. In the window that appears, select "Brush" in the drop-down menu, click ok.
We do all this on a new layer.
And you don’t need to display anything with just a pentula 🙂
Well, as you can see, the edges of the ribbon are transparent, so I duplicate the ribbon layer several times until it becomes completely opaque, and then glue these layers into one.
By the way, you can make a ribbon of any thickness without any problems, just duplicate the layer, and each time move it a little down until the thickness suits you. My ribbon will be in the form of the Russian flag, so I made it a little thicker:
Now, using the same pentula, equalize the edges, remove the jambs if they come out of you.
A little about White color on white. Again, no problem, just do a little gray instead of white, light gray. It will be possible to work with him and Bern.
Duplicate the ribbon layer and disable the bottom one. Now select the duplicate layer and change its color to light gray with ctrl+u . Then duplicate this layer, change its color to blue, and move the layer a little lower.
We do the same with red. Then we merge all these layers into one, select the very first layer with the ribbon (we make a selection from it without making it visible! To do this, just hold down ctrl and click on the layer icon. And then invert the selection by pressing ctrl + shift + i). Then we remove all unnecessary remnants of the ribbon.
The flag is ready. By the way, I also wrote a lesson about how, read it, maybe you can take out something useful for yourself.
We make voluminous ribbons
While writing this text, I decided to do it through bern and dodge.
Select the tool "Dimmer" aka Burn -
With these settings:
And in places where our tape bends inward, swipe from top to bottom 1-2 times - this will be a shadow.
With these settings:
And swipe from top to bottom, 1-2 times where the tape has a bend outward, that is, on us - this is light.
Now, I want to make edges like always. To do this, I duplicate the ribbon layer, using crtl + u make it white, select it by holding ctrl and clicking on the layer icon, move the selection 1 pixel down (down arrow on the keyboard) and clear the selection by pressing Backspac.
We are left with a single pixel edge. I will move this edge down by 1 pixel (hold down ctrl and press the down arrow), since the background is white and this edge will simply not be visible on it. In general, I shift and set the mode of this layer to "overlap". We also add ribbons below:
Well, the final step, I will add some noise to the ribbon so that it has , for this I select the layer with the ribbon, go to Filters>Noise>Add Noise, put down the amount of 0.7:
Now, I have given the simplest, fastest and easy way drawing a ribbon, you can sit longer - the result will be better. Maybe later, somehow I will write a continuation of the lesson.
This is the header I ended up with:
If you have any questions - ask in the comments. Let's help.
St. George's ribbon is an integral symbol of most military holidays, which has long since left its mark on history.
The history of the emergence of the St. George's ribbon
The tradition of using the St. George ribbon appeared a long time ago.
Someone wears a ribbon on their bags, backpacks, things, someone hangs it in the car, someone glues it on notebooks and so on. In general, one thing is clear that today you can find a bunch of options on how to use the St. George ribbon. The images - "St. George's Ribbon" are no exception. How to draw this symbol, read below.
And now some information from the history of occurrence.
The St. George Ribbon appeared during the reign of Catherine II, when by order of the Empress it was awarded for victory, courage, bravery and loyalty to the Motherland.
Now it is an ordinary accessory, an attribute of your clothes, which is worn during military holidays (at least on Victory Day), and in which people still put a special meaning.
How to draw St. George's ribbon with a pencil?
St. George's ribbons become very popular on the eve of Victory Day, when every passer-by has one, and it is simply handed out on the street. You can try to draw it. How to draw the St. George ribbon in stages?
It's easy enough and won't take up much of your precious time.
To do this, you will need two colors - black and yellow-orange, with the help of which the St. George ribbon will appear. How to draw her unusual, wrapped, wavy?
First you need to draw two lines exactly: the vertical one is longer and the horizontal one is shorter. It is better to draw under the ruler so that the drawing is smoother and more beautiful. Then you need to draw an oval evenly and symmetrically above the horizontal line.
A little lower, you need to draw two strokes parallel to each other, which are the elements of the tail of the tape.
The oval must be outlined so that two loops are formed, first with right side, and then from the left, so that they come forward one in front of the other. Stretch the loops so that they are directly proportional to the oval. The edges need to be widened.
Let's go back to two strokes. We connect them in a ribbon-like manner and make a small wave to get an image of a folded ribbon.
The St. George Ribbon is almost ready. How to draw it further?
Now in the empty cavities you need to draw straight lines and decorate them alternately with the colors that you originally prepared. Nothing complicated, you did it!
Where and how is the St. George Ribbon used today?
Before you is the symbol of Victory Day - St. George's Ribbon. How to draw it on a piece of paper, you already know. As for its application today, it is worth saying that people do not violate the long-established tradition and continue to wear a ribbon on Victory Day. Whatever one may say, but this real story which made today. Therefore, in honor of the memory of those who gave us a peaceful sky, the St. George ribbon is still used. How to draw it in stages and with a pencil, you already know.
DIY greeting cards and posters are one of the most common crafts that are being prepared for Victory Day. Their main theme, of course, is warm wishes and beautiful congratulations to the veterans and eyewitnesses of those terrible events. The decorations of such postcards and posters, as a rule, are the constant symbols of May 9 - St. George's ribbon, carnations, a red five-pointed star. There can be many variations for crafts, but most often they choose simple drawings, combining several characters at the same time. For example, a bright red star tied with a St. George ribbon will decorate any postcard. From our today's article, you will just learn how to draw a St. George ribbon and five-pointed star with a regular pencil.
How to draw a St. George ribbon with a pencil for May 9 - a master class with a photo
At first glance it may seem what to draw St. George ribbon It's hard to do it by hand with a pencil. But in fact, if you follow each step exactly, then even a person who does not have developed artistic skills can complete this drawing. A bright St. George ribbon can become a decoration for greeting card, as well as the basis for holiday drawing, dedicated to the Day Victory.
Necessary materials:
- paper
- simple pencil
- black and orange pencils
- eraser
- ruler
Step-by-step instructions for drawing a St. George ribbon:
- Using a ruler and a simple pencil, draw two parallel lines. The distance between the lines should be about 5-7 cm. Then we cross both lines with two of the same parallel diagonal lines. We will clean the intersections with an eraser. photo 1
- Draw a semi-oval on top. We will also connect parallel lines with short lines. photo 2
- With a black pencil, draw inside the base of the line and every two fill them with black to get characteristic stripes. photo 3
- The remaining gaps between the black stripes are filled with an orange pencil. Our St. George ribbon is ready! photo 4
How to draw a St. George ribbon with a pencil step by step, video
A step-by-step drawing of a St. George ribbon by hand can also be viewed in a simple video tutorial below.
How to draw a five-pointed star step by step using a ruler and a compass - instructions with photos
The red five-pointed star is another unchanging symbol of Victory Day. Most often, her image is used as decoration for congratulatory posters. To draw the correct five-pointed star, you must definitely use a ruler and a compass. Find out exactly how to do this from our master class, in which we suggest you master drawing a three-dimensional five-pointed star with a pencil.
Necessary materials:
- paper
- simple pencil
- red and black pencils
- eraser
- ruler
- compass
Step-by-step instructions for drawing a five-pointed star:
- To begin with, using a simple pencil and a compass, draw a large circle in the middle of the sheet.
- Then we take a ruler and draw two straight lines through the center of the circle, dividing it into four equal sectors.
- Now we divide each sector in half with straight lines and get eight identical sectors.
- At the next stage, we divide the two central lower sectors and the two upper lateral sectors with straight lines.
- Now we make marks, as shown in the photo below.
- From the upper center line we draw two straight lines to the lower marks.
- We also connect the two lower marks on the side sectors with a straight line.
- With a black pencil we connect the lines to each other, forming the basis of our star.
- Draw a line inside the star with a black outline.
- Now the finished workpiece needs to be decorated in red. Side faces the stars are slightly tinted with a simple pencil to get a three-dimensional five-pointed star.
How to draw a star with a compass by May 9, master class with video
And from this video tutorial you will learn how else you can draw a five-pointed star using a compass.
We hope that our simple instructions helped you figure out how to draw a St. George ribbon and a star on May 9 with your own hands. We are sure that by applying this knowledge in practice, you will be able to decorate wonderful crafts for Victory Day.
There is a fairly widespread opinion that someone is given to draw, and someone creativity missing. This statement is fundamentally wrong, every person is talented from birth. I suggest you get acquainted with how you can help your child express himself in the artistic field.
What could be more enjoyable than drawing with your child? Especially when there is an event to which you can dedicate your work of art. Victory Day is a solemn holiday that deserves attention. In addition to creating a drawing, you can familiarize your child with history a little and tell him about the great feat of our ancestors.
How to draw pictures for May 9 - Victory Day?
There are several ways to draw:
- Through carbon paper or a gap (for example, putting the original drawing on glass, press a clean sheet on top of it and circle the lines). The easiest way to copy an image
- By cells. You can transfer the original drawing to a sheet in a box, and then redraw it, or draw both sheets into squares of the same size. If you have an image to draw on your computer, you can not print it, but make a grid in the Paint program:
- In the form of geometric shapes:
-Measure the height and width of the original drawing, make a border of the drawing limits for yourself
-Try before redrawing to present the picture in the form simple forms: square, oval, circle
-Represent the ratio of horizontal and vertical
-Start adding details by measuring their size with a pencil on the original drawing
-Round sharp corners, blend lines
-Add missing
- Arbitrary lines. In this case, you simply redraw the image, maintaining the proportions by eye, without measurements and auxiliary means. The most difficult way to draw, often a copy is very different from the original image
Templates for sketching, copying with a pencil
- The holiday of May 9, like any other, has its own symbolism and distinctive features. For example, this image of an eternal flame:
Eternal flame drawing template 
Template for copy - or whole compositions:
Boys love tanks, so why not learn how to draw them? In order to learn how to draw a tank you will need:
- A simple pencil of medium hardness (for the ability to draw lines of different thicknesses or shade)
- Ruler (straight lines are not good for everyone by hand)
- Paper
- Soft eraser
If you have prepared everything you need, start drawing:
- Draw with simple shapes
- Draw or draw the base for the tracks and body, mark the location of the wheels in the outline for the tracks. There should be 5 of the same width and two small ones on the sides.
- Draw the tower and muzzle. The tower is a beveled rectangle
- Draw five wheels of the same size and one smaller.
- Round the lines of the turret and tracks
- Draw the gas tank and hatch, draw small details on the tower
- Draw the tank in detail, add the contour of the wheels, draw the axles.
- Erase with an eraser extra lines you can loosen it up a bit
Perhaps the algorithm described above is a bit complicated for your child. For kids before school age You can simplify the drawing a little:
Of course, we should not forget about the smallest artists. For kids, the following tank model is suitable:
Such a simple but cute tank, also start drawing from the base and tracks. AT this case it will be 2 ovals flattened on top. Then go to the tower and the cannon. Optionally, you can add your own details (gas tank, hatch, tanker).
Combining business with pleasure allows drawing by cells. With this technique, you not only end up with a proportionally correct image, but also develop fine motor skills the child and his imagination, because only the contour is drawn in the cells, and the child will have to come up with the internal contents.
Airplane pencil drawing
Of course, there are a lot of varieties of aircraft, but let's first look at how to draw military and passenger aircraft.
When drawing a military aircraft dominated sharp corners and strict lines, so keep a ruler handy
- Using a ruler, draw the main lines of the body, which you will later focus on. On the main horizontal line, draw a small rectangle on the right side. This will be the cockpit. Do not forget to make additional lines on the wings - flaps
- Outline the contours, give the plane a shape. Start tracing from the nose, making it pointed, go to the wings last to see the proportions
- Separate the nose with a curved line, and round the corners of the rectangle (cockpit)
- Take care of the wings. Draw on the edges of the rocket, mark the flaps on the sides with rectangles. Optionally, you can add inscriptions or identification marks.
- Add tail details
- Remove extra lines with an eraser, blend where necessary, decorate
The passenger plane is dominated by smooth semicircular lines:
- Start drawing from the body of the aircraft, it is an elongated oval. Using a ruler, draw a line of wingspan and outline the tail
- Add wing lines to make triangles, draw the top line of the tail
- Use the small circles to represent the aircraft's tail turbines.
- Draw the turbines to make cylinders, shape the wings
- Draw a line in the middle of the oval - this is how you designate the windows
How to draw a passenger plane - Draw details and remove unnecessary lines
For preschool and primary school children, use the following algorithm:
Another invariable attribute of Victory Day is, of course, a carnation. Like any flower, start drawing from the stem - straight lines, then the base of the flower - an oval and petals - of arbitrary shape.
A distinctive feature of the carnation is the jagged edges of the petals, so do not aim at the smooth edges of the petals at the beginning of the drawing, so that it is easier to erase the extra lines.
How to draw a star for May 9?
How to draw a star with a ruler and a compass, you can read in the article on our website.
I propose to consider other ways of drawing.
without taking your hands off
- This is the fastest and easiest way to draw a star, but it is unlikely to be perfectly even the first time.
- Draw an inverted V starting from the lower left corner (DAC)
- Draw a line to the right so that it intersects the letter at 1/3 (CE)
- Starting with an isosceles triangle
- Draw an isosceles triangle (ABC) Extend the sides of the triangle by 2 times
- Extend the base so that the center (BC) is about 1/3 of the total length
draw the missing lines
Victory salute drawing
There are many types of holiday fireworks, so we will consider various ways drawing.
- droplets
Draw curved stripes from the center with droplets at the end. The more such droplets, the more magnificent the fireworks. For believability, add shorter lines in the center of the salute.
- small segments
You can also depict a salute using small segments or dotted lines of different lengths, which are drawn from the center to the edge of the salute circle.
- Long lines
The easiest way to draw fireworks. Draw as many curved lines as you can from the center.
flower pattern
You already know how to draw a carnation, let's look at how you can draw other flowers:
- Wild flower
Start drawing with a stem, then draw a semicircular flower head, and petals on it. First draw a few main petals, and then add the rest between them, side by side.
- Bell
Start drawing this flower from the head. Mark with light lines the place of the flowers with circles, then draw the petals, start with an oval, pointed on both sides, and add sharp petals on the sides. Then draw the semicircular base of the flower, stem and leaves.
- cornflower
Draw a circle - this will be the core of the flower, draw 7 petals around, expanding towards the edge. Make the edges of the petals jagged. The cornflower flower is ready, it remains to finish the stem and leaves
- Tulip
Tulip start drawing from the central, front petal, which is an oval
- Chamomile
Start drawing daisies with outlines. To do this, draw a stem line and above it 3 circles of different sizes - the center of the flower, the core and the diameter of the petals. Draw the petals in the space between the second and third circle.
Draw the stem and sharp chamomile leaves
- Draw the outline of the leaves and buds, draw the outlines of the bud in ovals or circles, place them in small groups.
- Draw smaller circles in the circles of the buds - these will be the cores of the flowers.
Draw the shape of the flowers, mark the petals with teeth or wavy lines - You can depict a ribbon of a bouquet by drawing two parallel semicircular lines at the base.
- At the end, draw the leaves in the bouquet and finish the missing details.
Eternal flame drawing
- Draw a small oval and draw the rays of the future star from it
- Designate gradations between the lines of rays
- Connect the lines together
- With additional duplicate lines, you can add volume to the star and burner
- Draw a fire over the burner
Can you draw Eternal flame according to the template and you just have to add fire and decorate the picture:
Peace dove drawing
I offer you 2 versions of the picture, but they differ only small details. So:
- Draw a circle and an oval for the pigeon's head and body.
- Smoothly connect the shapes and mark the tail. The tail is about the same length as the body.
- Move on to the wings. First, outline the contours with obtuse angles, then draw large feathers
- Add a beak (in the form of a diamond), an eye (a circle or an oval pointed on the sides) and elongated legs
St. George Ribbon Drawing
- Draw 2 parallel lines crosswise
- At the top, connect them with semi-ovals
- Erase extra lines in the middle
- Colorize
Video: How to draw a St. George ribbon?
How to draw a soldier?
When drawing a soldier of any complexity, start with the head, then draw the neck and smoothly move to the torso.
- First draw a circle and, focusing on it, draw the contours of the face
- Draw oval eyes, nose, eyebrows. It is not necessary to draw carefully, in general proportion the face is quite small, so the lips can simply be indicated by a straight line.
- Draw a sheet with light lines, take the height of the head without a headdress as a unit
- Mark the middle (end of the uniform) with straight segments, outline the arms and legs
- On this "skeleton" draw a shape
- On the form you can draw shoulder straps, belt, orders, identification marks
For little artists, it’s not enough to draw a marching soldier:
- Draw a circle - the head, mark the torso with straight lines, mark the arms and legs, mark the hands and feet with triangles
- On this frame, add a body and a shape
- Colorize
Very simple 2 drawings of a soldier for drawing for children.
What to draw for children for the easy contest?
The plot of the drawing for the competition can be completely different and is limited only by your imagination. It can be a star with a ribbon, a soldier who is met by parents, a battlefield, fireworks and many many others.
We invite you to look at a few children's drawings for Victory Day, and perhaps they will give you the idea of creating your own unique competition work:
